Raspberry Pi Model B+ Unboxing!

Hi guys, it been a long time since i last update this blog. Here is something new for you. The Model B+ unboxing!

I've purchased this from element14 as well. Same purchasing procedure like my model B post here.

So without further delay, some pictures for you to see.

Element14 Packaging

The stuff inside the box

MC-RP002-CLR Pi casing, Wifi Module and Pi Model B+

Removing the plastic covers...

Here are some views from different angle of model B+...

B+ Side View 1: Micro USB, HDMI & RCA port

B+ Side View 2: LAN & USB ports

B+ Side View 3: The GPIOs

B+ Close Up Top View: The SMTs and BCM SoC

B+ Back View: The micro SD card slot

B+ with the casing and WiFi module installed

Powering on The B+

Here is a simple review on the casing, MC-RP002-CLR enclosure is pretty easy to use. It doesn't require a lot of work to install. The installation is available for download in the element14 page. 

Cons:

1. The B+ board doesn't sit tightly in the casing, it still have small room for the board to move around inside the casing. 
2. Don't ever drop the your B+ with the casing. Feels like it is going to break it you exert too much force.

Pros:

1. You must install the rubber pad beneath your casing, it sits firmly on the desk and won't move around easily.
2. Dust proof =)

That's it. Hope you enjoy this. Happy 2015!